MIL-DTL-5015 Connectors, Circular MS3400 (Front Release Contact) and MS3450 (Rear Release Contact) Series Crimp Type Contacts

Glenair Designator Code A


Design Features

  • Threaded coupling design, captive
  • Fifteen shell sizes--Range 8 thru 48 (.50 to 3.00 diameter)
  • Wide variety of contact sizes, standard density; 1 to 100 contacts
  • Conductive finish--Cadmium/olive drab, 500 hour salt life, and electroless-nickel options
  • Stainless steel class available for severe environments
  • Controlled accessory interface per MS3155
  • Cork and bottle interface seal and shell environmental seal, fuel resistant fluorosilicone elastomers
MIL-DTL-5015 Connectors, Circular MS3400 (Front Release Contact) and MS3450 (Rear Release Contact) Series Crimp Type Contacts; Glenair Designator Code A

Notes

  • Same interface features as MS3100 and MS3106; intermateable
  • Rugged construction to meet severe shipboard applications
  • Connector shell may strike pin contacts, thus power should always be on socket contacts
  • Single keying may not always insure shell polarizing
  • Accessory thread size and geometry is not intermateable with MIL-DTL-5015, 3100 series solder type connector accessory